Detail Alat Uji »
Aplikasi:
Untuk menguji ketahanan konektor pin isolasi plug/steker terhadap panas yang tidak normal.
Model: CPL-A40.1
Sumber daya: AC220V, 50Hz
Dimensi: 450 x 350 x 350
Sampel Uji: Plug, Steker, dsb.
Sesuai standar: SNI IEC 60884-1 Gambar 40
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
1 thermo couple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position
Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product.
Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced.
Gap between the boards of insulation and metal B : 3 mm,
The distance between the metal thermo couples & B: 7 mm
Metal bolt hole B : more than 0.1 mm
Conforms to standard : SNI IEC 60884-1 Figure 40
Untuk menguji ketahanan konektor pin isolasi plug/steker terhadap panas yang tidak normal.
Model: CPL-A40.1
Sumber daya: AC220V, 50Hz
Dimensi: 450 x 350 x 350
Sampel Uji: Plug, Steker, dsb.
Sesuai standar: SNI IEC 60884-1 Gambar 40
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
1 thermo couple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position
Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product.
Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced.
Gap between the boards of insulation and metal B : 3 mm,
The distance between the metal thermo couples & B: 7 mm
Metal bolt hole B : more than 0.1 mm
Conforms to standard : SNI IEC 60884-1 Figure 40
