Detail Alat Uji »
Aplikasi: Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api & percikan api yang dapat merusak spesimen.
It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.
| Model | : FM-02 |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Flammability Tester |
| Dimensi(mm) | : 1100 X 600 X 800 mm |
| Berat (Kg) | : 75 ~ 90 Kg |
| Produk/sample uji | : Plastik & material lain non logam |
| Sesuai standar | : SNI ISO 845, ISO 9773 |
It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.
- Timing device with four digit 9999X0.1s
- Automatic Carried unit device for movement of needle
- Smoke/fume exhaust Ø 113 mm incorporated in chamber
- Black painted cabinet more than 0,5 m (2.05 m )
- Gas flow regulating valve for flame height, manual adjustment
- Gas pressure regulator and safety control
- Needle burner tilt to 45° from the vertical, manual adjustment
- Ring Stand easy to grip the sample
- Preset time of testing; 5s, 10s, 20s, 30s, 60s, 120
- Lighting inside the cabinet and fan control
- Easy manual panel control with push button lamp
- Timer Display for record data time burning, time flame
- Time for temperature to increase (100° to 700°; 23,5 s)
- Combustion angle 0 , 20 , 45
- Height of flame Up to 125 mm
- Gas Supply Propane min 95% purity
